@kyle_boyce wrote:
So the post URL is http://blog.gayming.online/t/the-new-gayming/123
However, when I try to access to post from my phone it says not found, even when I navigate to it via the home page of my site…?
Posts: 11
Participants: 3
@kyle_boyce wrote:
So the post URL is http://blog.gayming.online/t/the-new-gayming/123
However, when I try to access to post from my phone it says not found, even when I navigate to it via the home page of my site…?
Posts: 11
Participants: 3
@Pad_Pors wrote:
sorry the images are with Persian words. if you note at the red circles, I hope you can see the wrong behavior.
if I go to the search page and I search a word, I’ll find some entries for it:
if I want to do the same search in a specific category using the advanced search it gave me wrong results:
as you can note it didn’t find anything. though in the first image, the first entry is from the same category selected in the second image.
if you go to the category page, and search in the category for the word, you will see the correct result:
Posts: 2
Participants: 1
@kyle_boyce wrote:
A check for updates has not been performed lately. Ensure sidekiq is running.
I tried this
and it didn’t work any help would be appreciated!
Posts: 2
Participants: 2
@CamilleRoux wrote:
Hi!
If I use an URL as title for a post and add nothing, the post has no description and it’s invalid for a Twitter Card.
Here is a post to reproduce the error: Dans la Silicon Valley, « coder, c'est chiant à mourir » - News - Pragmatic Entrepreneurs Forum. And here is the validator: Login on Twitter
Posts: 1
Participants: 1
@nixie wrote:
Hi,
Posts from a particular category missing from homepage
This is the only category in which I have enabled the “solved” plugin.Just before this happened, this is what I was doing:
I accessed the category URL, appended ?solved=no to it and was browsing through the posts.
And I was marking solutions. (as admin user).
Once I was done with it, I went back to the homepage.
And found it was no more showing any posts from that category.
I tried everything , like refresh etc.
Posts from that category is missing just for the admin user.
Posts: 10
Participants: 3
@tobiaseigen wrote:
What is the best way to invite a user or group to many personal messages at once? I don’t see a way to do it via the ui.
Posts: 1
Participants: 1
@imtrobin wrote:
Hi, I’m trying to install using Virtualbox Ubuntu 16.04 following the docker instructions here.
Everything seems ok, no errors during installation, I finished it, and when I try to access by IP, it returns a
Error code 102 (net::ERR_CONNECTION_REFUSED)
I have disabled firewall, so what else should I check? The instructions does not say what to check if it does not start.
Posts: 3
Participants: 3
@angus wrote:
Repo: GitHub - angusmcleod/discourse-locations
This plugin allows you to associate locations with topics, and list topics with locations on a map.
You can see an example of it in action on my sandbox.
Maps are handled by Leaflet.js and multiple geocoding providers are supported. Both are customizable via admin settings as explained below in ‘Admin Settings’.
Features:
Locations can be turned on for specific categories by toggling ‘Allow locations to be added to topics in this category’ in the Category settings.
When locations are turned on a for a category:
The composer will include an ‘Add Location’ button when composing a new topic in that category.
This opens a modal which allows the user to enter the location details, including a geocoded address:
‘Map’ will be added to the category nav items. This will display a map in place of the topic list with topics that have geocoded locations associated with them marked on it. This list can be set as the default for the category in the category settings. When multiple topics are associated with the same location, they are grouped into expandable clusters (using the Marker Cluster plugin for Leaflet). Clicking on the markers navigates the user to the associated topic.
When a location is added to a topic:
The location details will appear underneath the topic title. If the location is geocoded a ‘Show Map’ button appears to the right of the location details. This button toggles a mini-map showing the location.
Locations can be edited in the ‘topic title’ edit controls.
The map controls available to users are:
Expand . This will expand the map to take over the whole window aside from the Header bar.
Zoom . This are standard leaflet zoom controls.
Attribution . This toggles the visibility of the attribution.
Admin Settings:
location input fields enabled
: toggles whether ‘Add Location’ modal displays specific location input fields or a single location query input
OR
location input fields
: sets what input fields are used iflocation input fields enabled
is true
location geocoding
:
none: User is required to enter either a name or an address when adding a location. Addresses are stored as a string.
optional: User is required to enter either a name or an address when adding a location. Addresses are geocoded and will display on any associated maps.
required: User is required to enter an address when adding a location. Addresses are geocoded and will display on any associated maps.
location geocoding provider
: the service that translates user input into coordinates that can be displayed on a map. Geocoding is handled by the Geocoder gem, which supports a number of geocoding providers. Think of these providers like you would a transactional email provider. The list of providers available in this plugin is a sub-set of the list in the gem. The providers currently supported by this plugin are:Nominatim is the default, as it doesn’t require an api key, has no (relevant) restrictions in terms of use and is good for testing and light use. My preferred provider is Mapzen, partly because they gave me the best results when testing my home address, partly because their Geocoding service is not restricted to use with Mapzen maps and partly because they have open-sourced a lot of their stuff. The other providers have their strengths though. I suggest you review each of them (e.g. check the Terms; test relevant addresses) if you’re serious about using this plugin.
This sub-set of providers available through the Geocoder gem were chosen according to these criteria:
Ease of integration. The reason I didn’t include Google is because Google Maps is not designed to be used with Leaflet.js (or any other 3rd party software). I did get it working, however it requires multiple customizations specific to Google and the end result is not great, so I don’t want to support it considering there are a number of other more customizable providers that can do the job just as well. If for some reason you must use Google Maps with this plugin, it is possible, but you will need to handle and support the integration yourself.
Terms of Service. A number of the Geocoding providers only allow you to use their geocoding data in conjunction with their own maps. This is true of some of the providers this plugin does support. For example, you can’t use Mapbox data on non-Mapbox maps. For the providers that have this restriction I have only included those that make it relatively easy to use both their geocoding service and their mapping service with Leaflet.js, so the service can be used without breaching the provider’s terms.
Functionality. Some of the providers listed in the Geocoder gem docs no longer work.
location geocoding api key
: When a geocoding provider requires an API key, enter it here before you switch to that service in thelocation geocoding provider
setting. If you switch to a provider that requires a key before entering a key you will get an error.
location geocoding timeout
: This sets the timeout for the Geocoder gem. It is unlikely you will need to change this.
location map tile layer
: Aka the “basemap”. This is the actual map image on which locations are shown. There is a large variety of basemaps that can be used. Keep in mind that some Geocoding providers require you to use their basemaps when using their geocoding service. There’s a nice basemap showcase here.
location map tile layer subdomains
: Relevant for some basemap providers. It is unlikely you will need to use this.
location map attribution
: This string will appear when the ‘i’ button in the bottom right corner of the map is clicked. Please always give attribution to the providers you are using.
Posts: 3
Participants: 3
@ckhawand wrote:
We are running a discourse forum at 000webhost, however it has gone down yesterday, then it came up today with the installation page, then it magically restored a 1 month backup, and most of user uploaded profile pictures have disappeared.
Please advice.
Posts: 4
Participants: 2
@angus wrote:
Repo: GitHub - angusmcleod/discourse-events
This plugin allows you to associate datetime ranges with topics and list those topics in the chronological order of their datetime ranges. In other words, it lets you manage events in Discourse.
You can see an example of it in my sandbox.
Note:
Another plugin that allows you to manage datetimes in Discourse, with more of a focus on timezone management, is Discourse Chronos (when it is released).
If you’re managing events being held at physical locations, you may want to consider using this plugin alongside my Locations Plugin (both are in action in the ‘Events’ category in my sandbox).
Features:
Events can be turned on for specific categories by toggling ‘Allow events to be added to topics in this category’ in the Category settings.
When events are turned on for a Category:
The composer will include an ‘Add Date and Time’ button when composing a new topic in that category.
This opens a modal that allows you to add a start datetime and an end datetime
Time selection is aided by a dropdown with 30 minute increments. Date selection is aided by a calendar picker.
‘Agenda’ will be added to the category nav items. It can be selected as the default list for the category in the category settings. This list filter will display a list of the topics with datetime ranges associated with them in the ascending chronological order (i.e. earliest first) of the start datetime for each range.
The other lists in the category will be ordered as normal.
When an event is added to a topic:
The event details will appear underneath the topic title.
If the
events add to calendar
site setting is turned on, an ‘Add to Calendar’ button will appear to the right of the event details. This provides a direct link to add the event to Google calendar and allows the user to download an .ics file with the event details.Admin settings:
events add to calendar
: This toggles the ‘Add to Calendar’ button next to the event details in the topic.More notes:
Datetimes are stored as Unix timestamps (i.e seconds since epoch). This makes it easy to order the topics using the existing topic list filter structure.
Time conversion and formatting on the client is handled by moment.js; see e.g. the eventLabel helper. Should probably add settings that allow the time format to be changed.
Time selection dropdown is handled by the jquery-timepicker plugin. Probably could be replaced by a native solution in the future. And the increment period of the times in the dropdown should be a setting.
As raised re the similar button in the Locations Plugin, adding a button to the composer is perhaps not ideal. Trying to think of a better solution for this.
Posts: 1
Participants: 1
@pain wrote:
how to disable discourse from crawling (embeding) links, for security reasons.
these settings i have for onebox seem to failed
Posts: 5
Participants: 3
@adriatic wrote:
Here is the relevant ending from the
var/discourse/shared/standalone/log/rails/production.log
file:Sent mail to admin@aureliatools.com (30033.8ms) Job exception: end of file reached Sent mail to admin@aureliatools.com (30095.3ms) Job exception: end of file reached Started GET "/" for 69.136.148.245 at 2017-09-11 02:51:14 +0000 Processing by FinishInstallationController#index as HTML Rendered finish_installation/index.html.erb within layouts/finish_installation (1.8ms) Rendered common/_special_font_face.html.erb (0.3ms) Rendered layouts/_head.html.erb (9.2ms) Completed 200 OK in 37ms (Views: 13.9ms | ActiveRecord: 0.0ms) Sent mail to admin@aureliatools.com (30032.4ms) Job exception: end of file reached Sent mail to admin@aureliatools.com (30087.8ms) Job exception: end of file reached
The confirmation email did not arrive, despite several attempts - looks like a bug in the installation script on the first glance.
Please advise
Posts: 13
Participants: 6
@PBn wrote:
I am setting up a site and discourse is rejecting the referer. I have tried all reasonable permutations of the url of the embedding site in the discourse setup.
But on the page it always displays the same blank referer error:
The site is HTTPS but everything is set up reasonably, or reasonably enough to work at least.
But no matter what I do the referer is blank.
I assumed that it was some kind of downgrade problem with the HTTPS hiding the referer but I can’t seem to work out what’s going on.The request seems fine…
Anyone have a clue?
ps sorry for my shitty site
Edit:
nvm
I was stripping referers on the page like an idiot.
Posts: 1
Participants: 1
@Pad_Pors wrote:
it’s a little off both in the category page and also topic page:
Posts: 4
Participants: 3
@jcoates wrote:
The frequent poster stats within a topic are currently based off of total number of actual posts, not those visible to the user. For example, log out and take a look at Onebox Link Trips ‘First Quote’ Badge. You will see the that Jeff and Joshua each wrote two hidden posts and TechAPJ is listed although he didn’t write any visible posts.
Likes totals are also drawn from total number of posts rather than visible.
Posts: 6
Participants: 3
@Markus_Maurer wrote:
Hi there!
I am a happy user of Discourse - thank you so much for the continual development.
What i would like to see, is logged-out / not yet registered visitors to be able to create a new topic. They create the post and after clicking “create topic” they have to sign up for an account.
The topic will be saved in the browser cache (as already is done with Discourse) until the sign up process is done.
There are already several webservices who use this kind of behaviour. The advantage is:
The visitor has already written the post, so he knows it would get lost if he doesnt sign up -> Improves sign up rate
I am no tech expert, so please forgive me if this wouldn’t be possible!
Posts: 3
Participants: 2
@JamesNorth wrote:
Hi All,
I’ve managed to reproduce this several times on two Discourse installs.
- Create User, assign to
group
- Create category, llock
category
togroup
- User is
Watching
thatcategory
- Change that User’s
username
Post in that
category
as admin or reply to post byuser
and the system doesn’t even bother generating emails notifying that person of posts.It doesn’t appear in the skipped logs or in ‘sent’.
Can anyone else see this happening?
Thanks!
Posts: 16
Participants: 3
@burningman wrote:
See MPSocial Forum - https://mpsocial.com
I want to manage my forum page like this. Means On the distributing posts under category. Oops, Little hard to explain.
This is my forum which is installed currently - http://forum.buzzbasement.comWhat settings should I choose to change homepage.
Posts: 14
Participants: 3