Changing timestamp of thread replies - Easier way?

November 29, 2016, 6:13 pm

≫ Next: Admin Plugin page is blank - Error: There is no route named adminPlugins.index

I see that there's now a way to change the thread's timestamp through the UI and that it does a relative timestamp update for all following posts. That's awesome!

However, I'm looking for a way to specify a timestamp for replies WITHIN a topic. I'm wanting to do an archival/restoration project for an old forum that's since been deleted and will be manually pulling post text from Archive.org. Having to muck around in the CLI is going to make using Discourse unfeasible.

Is there any way to extend that functionality to subsequent replies within a thread, or at least a way to make mucking around in the CLI not such a tedious project? Hoping there's something easier than the last time I checked: https://meta.discourse.org/t/editing-post-date/19506

Posts: 4

Participants: 2

Read full topic

↧

Admin Plugin page is blank - Error: There is no route named adminPlugins.index

November 29, 2016, 7:19 pm

≫ Next: Force https for login URL

≪ Previous: Changing timestamp of thread replies - Easier way?

@Magnetidog wrote:

Hello!

I just upgraded via shell on a DigitalOcean installation with 8GB a Discourse forum. All is working fine, with the exception of the plugin area in the Administration panel, which is entirely blank.

If I go to admin/upgrade, the list loads fine, instead.

I see this error in Firebug coming from a js file:

Error: There is no route named adminPlugins.index
http://mydomainhere/assets/ember_jquery-37ec8949e7219a8c2b3cdebef9d43bc64a66860ec196f3e10bea842d0296256f.js
Line 16

Tried to search in the forums for the same issue but I could not find anything.

I attempted multiple rebuilds and disabled plugins, without luck.

Thanks!

Posts: 7

Participants: 4

Read full topic

↧

Force https for login URL

November 29, 2016, 9:53 pm

≫ Next: National flags indicating home country of each user?

≪ Previous: Admin Plugin page is blank - Error: There is no route named adminPlugins.index

@zeigerpuppy wrote:

I am testing out embedded comments in a grav blog (see https://meta.discourse.org/t/embedding-discourse-comments-via-javascript/31963).
However, I am having a problem with the embed URL redirecting to the discourse login url over http instead of https.

I am running the latest discourse (docker install) on port 20090 and reverse proxying with apache2 to get the site as https.
This works well but discourse is serving internal links that map to http instead of https.
This causes a problem with embedding in an https page because browsers recognise it as insecure content.

Is there a way to force all discourse URLs to be https? I have seen the use_https setting but I'm not sure where I would put this in the config.

Also, is it possible to turn a private forum (configured in the setup) back into a public forum that doesn't require login to see forums?

Posts: 1

Participants: 1

Read full topic

↧

National flags indicating home country of each user?

November 29, 2016, 10:11 pm

≫ Next: Split e-mail rate limit between notification and mailing-list mode

≪ Previous: Force https for login URL

@Gunnar wrote:

One thing we had on our old (home made) forum was little flags showing where each user is from. We have members from all over the world, so that is now our #1 most requested feature on Discourse.

Would this be hard to implement? Best place for it would probably be the user card.

Thanks,
Gunnar

Posts: 2

Participants: 2

Read full topic

↧

Split e-mail rate limit between notification and mailing-list mode

November 29, 2016, 10:11 pm

≫ Next: Only admin has the invite button

≪ Previous: National flags indicating home country of each user?

@vchuravy wrote:

I just got a report from a user who is using discourse primarily via the "mailing list" mode, that he had hit the 100 e-mails per day limit.

From my understanding the setting max emails per day per user applies to all e-mails that discourse sends out. Would it be possible to split that setting into max notification emails per day per user and max mailing list emails per day per user? For the latter category I would like to make it unlimited (to be as close as possible to the mailing list use-case), and for users who primarily use the web frontend a limit of 100 e-mails seems sensible.

Posts: 3

Participants: 2

Read full topic

↧

Only admin has the invite button

November 30, 2016, 12:14 am

≫ Next: Much slower after update

≪ Previous: Split e-mail rate limit between notification and mailing-list mode

@Pad_Pors wrote:

hi,

in our forum, there is no button for inviting users in user profile page or topic pages (even for TL2 users and above) .

this button is only visible to admins and moderators.

I couldn't find any setting to tune this in admin panel.

in our forum the "must approve user" is active. is it the reason for invisibility of invite button?

Posts: 5

Participants: 3

Read full topic

↧

Much slower after update

November 30, 2016, 1:17 am

≫ Next: Problem with my Discourse after trying to upgrade

≪ Previous: Only admin has the invite button

@Idan wrote:

My discourse forum works very well and fast on EC2 micro instance before the upgrade (I know it's under the recommended hardware requirements), but now it's like 5 times slower, any idea why?

Posts: 6

Participants: 3

Read full topic

↧

Problem with my Discourse after trying to upgrade

November 30, 2016, 1:27 am

≫ Next: Moderator question

≪ Previous: Much slower after update

@HeleneC wrote:

Hello,
I tried to upgrade my Discourse yesterday but as the web connexion went out during the upgrade, it didn't work. The problem is that now Discourse doesn't work anymore, and it says 500 Internal Server Error
If you are the administrator of this website, then please read this web application's log file and/or the web server's log file to find out what went wrong." (forum.elueslocales.fr)
The person who installed it and can help us is in California so we cannot have any response before 5 pm.
Can you help us so we can fix the problem now ?

Thanks a lot,

Posts: 4

Participants: 3

Read full topic

↧

Moderator question

November 30, 2016, 2:01 am

≫ Next: Discourse fails with this.resource is not a function how do I find which plugin it is?

≪ Previous: Problem with my Discourse after trying to upgrade

@JagWaugh wrote:

Is there a simple way, via the GUI interface, to search for all users who are using digest mode?

As a mod, it would be nice to be able to search for users who are using digest mode, narrow that down to a category, then sort the resulting list based on most active account?

To be concrete, I am a mod on a large forum which very recently migrated to Discourse. The users are getting used to it, but some are taking a while to find their feet.

One of the users asked for instructions on how to set up digest mode. What I would like to do is find users who are already using digest, with that category enabled (the way our forum has always been the chances are the users will already be familiar with each other if they hang around the same category), Once I can find a list of such users I can (gently) suggest that they help the person in question, preferably by public discussion.

Posts: 2

Participants: 2

Read full topic

↧

Discourse fails with this.resource is not a function how do I find which plugin it is?

November 30, 2016, 3:29 am

≫ Next: SketchFab Embedding Issue

≪ Previous: Moderator question

@carlokok wrote:

After upgrading to latest (test succeeded) from yesterday I get:

TypeError: this.resource is not a function
at e.map (https://talk.remobjects.com/assets/plugin-third-party-c15b045136f5ae5869b035bca4dbde77d1a2af05355e10d92889d2cc7ef5c07f.js:1:31515)

This seems to be related to 1 of my plugins, but how do I find out which?

_ember_jquery-37ec894….js:54140DEPRECATION: `discourse/views/topic-status` was moved to `discourse/raw-views/topic-status`o @ _ember_jquery-37ec894….js:54140i @ _ember_jquery-37ec894….js:54124r.state @ _ember_jquery-37ec894….js:54181e @ _ember_jquery-37ec894….js:54048require @ _ember_jquery-37ec894….js:54180(anonymous function) @ _application-e1274ce….js:1253(anonymous function) @ _application-e1274ce….js:1264value @ _application-e1274ce….js:1250(anonymous function) @ (index):452(anonymous function) @ (index):456
_ember_jquery-37ec894….js:31194 TypeError: this.resource is not a function
    at e.map (https://talk.remobjects.com/assets/plugin-third-party-c15b045136f5ae5869b035bca4dbde77d1a2af05355e10d92889d2cc7ef5c07f.js:1:31515)
    at e.value (https://talk.remobjects.com/assets/application-e1274ceed913fb734402dae7314c227a1b2cb63f5767b423889615e254e34327.js:8:31373)
    at https://talk.remobjects.com/assets/application-e1274ceed913fb734402dae7314c227a1b2cb63f5767b423889615e254e34327.js:8:30307
    at Array.forEach (native)
    at n (https://talk.remobjects.com/assets/application-e1274ceed913fb734402dae7314c227a1b2cb63f5767b423889615e254e34327.js:8:30253)
    at Object.initialize (https://talk.remobjects.com/assets/application-e1274ceed913fb734402dae7314c227a1b2cb63f5767b423889615e254e34327.js:64:31285)
    at Object.test.n.initialize (https://talk.remobjects.com/assets/application-e1274ceed913fb734402dae7314c227a1b2cb63f5767b423889615e254e34327.js:1:20436)
    at https://talk.remobjects.com/assets/ember_jquery-37ec8949e7219a8c2b3cdebef9d43bc64a66860ec196f3e10bea842d0296256f.js:5:7117
    at https://talk.remobjects.com/assets/ember_jquery-37ec8949e7219a8c2b3cdebef9d43bc64a66860ec196f3e10bea842d0296256f.js:5:7430
    at Object.t [as default] (https://talk.remobjects.com/assets/ember_jquery-37ec8949e7219a8c2b3cdebef9d43bc64a66860ec196f3e10bea842d0296256f.js:18:1331)s @ _ember_jquery-37ec894….js:31194trigger @ _ember_jquery-37ec894….js:52141(anonymous function) @ _ember_jquery-37ec894….js:53392invoke @ _ember_jquery-37ec894….js:343flush @ _ember_jquery-37ec894….js:407flush @ _ember_jquery-37ec894….js:215end @ _ember_jquery-37ec894….js:570run @ _ember_jquery-37ec894….js:692join @ _ember_jquery-37ec894….js:712u.join @ _ember_jquery-37ec894….js:20452(anonymous function) @ _ember_jquery-37ec894….js:20515l @ _ember_jquery-37ec894….js:7fireWith @ _ember_jquery-37ec894….js:7ready @ _ember_jquery-37ec894….js:7a @ _ember_jquery-37ec894….js:7
_ember_jquery-37ec894….js:4740 Uncaught TypeError: this.resource is not a function(…)map @ _plugin-third-party-c15b045….js:1675value @ _application-e1274ce….js:16190(anonymous function) @ _application-e1274ce….js:16277n @ _application-e1274ce….js:16274initialize @ _application-e1274ce….js:101378test.n.initialize @ _application-e1274ce….js:1242(anonymous function) @ _ember_jquery-37ec894….js:5365(anonymous function) @ _ember_jquery-37ec894….js:5393t @ _ember_jquery-37ec894….js:54011n.topsort @ _ember_jquery-37ec894….js:2542_runInitializer @ _ember_jquery-37ec894….js:5392runInitializers @ _ember_jquery-37ec894….js:5360_bootSync @ _ember_jquery-37ec894….js:4731domReady @ _ember_jquery-37ec894….js:4625run @ _ember_jquery-37ec894….js:688join @ _ember_jquery-37ec894….js:712u.join @ _ember_jquery-37ec894….js:20452(anonymous function) @ _ember_jquery-37ec894….js:20515l @ _ember_jquery-37ec894….js:7fireWith @ _ember_jquery-37ec894….js:7ready @ _ember_jquery-37ec894….js:7a @ _ember_jquery-37ec894….js:7

Posts: 5

Participants: 3

Read full topic

↧

SketchFab Embedding Issue

November 30, 2016, 5:56 am

≫ Next: Improvement suggestions for groups (helpdesk mode)

≪ Previous: Discourse fails with this.resource is not a function how do I find which plugin it is?

@RobMeade wrote:

Hi,

I wasn't entirely certain where to turn for this one, so I thought I would ask here to see if anyone else is experiencing any problems.

I am a moderator on a hosted Discourse forum (https://community.gamedev.tv) and SketchFab was enabled so that users could simply paste in the full URL from that website and their 3D models would be embedded within the Discourse posts. It had been working really well for ages, you could zoom in/out, spin the 3D model around without having to leave the forum - fab.

It just recently when I noticed that someone had posted and it wasn't working, instead adding a kind of thumbnail of the 3D model, some text and a link to the SketchFab site to view it. I knew that it was possible to not get the desired result if there wasn't a blank line above and below the pasted URL, and also knew that there mustn't be any other text on the line with the URL, so I went and checked, but this didn't resolve the issue.

What is more confusing is that previous posts where this was applied are working perfectly well, but if I take a URL from SketchFab and try it in a new post I seem to get mixed results.

I am not an Administrator on the forum in question so have limited access to settings, although have posted hoping someone may be able to check, I believe it isn't much more than a whitelist entry for the domain and maybe a plugin though?

I am also not a 3D modeller and do not use the SketchFab site personally, so equally I do not know if there is anything "special" you are supposed to do to enable your model to work in an embedded fashion. What I can confirm though is that if I take the URL from a post where the behaviour was as expected previously (and still is) and then post that into a new post, the behaviour changes - which seems a bit odd.

If anyone has any experience of this or can suggest anything that may be causing it, or, if you want to be awarded my virtual Gold Star actually solve it - that would be fairly awesome.

Thanks for reading

Kind regards

Rob

Posts: 19

Participants: 5

Read full topic

↧

Improvement suggestions for groups (helpdesk mode)

November 30, 2016, 6:30 am

≫ Next: Paid Gig: Backup & restore + HTTPS (letsencrypt) + diagnose crash

≪ Previous: SketchFab Embedding Issue

@carlokok wrote:

having used groups since before it was even officially released to do "support"/"sales" there are a few things we'd like to see in Discourse to vastly improve the experience:

Search by subject/body and email address (esp for archived posts), this lets us find old posts.

Moving/merging posts: Sometimes when someone replies they use the To: email address instead of the Reply To: email address. When this happens I usually forward the mail manually, but it would be great if I could easily "add" it to an existing post.

Of course as always, these are just suggestions to improve discourse.

Posts: 3

Participants: 3

Read full topic

↧

Paid Gig: Backup & restore + HTTPS (letsencrypt) + diagnose crash

November 30, 2016, 7:03 am

≫ Next: Docker manager reports upgrading even after rebuild

≪ Previous: Improvement suggestions for groups (helpdesk mode)

@seyitaylor wrote:

What would you like done?

Install at http://radar.techccabal.com keeps going down with 502 error. Restarting the droplet seems to bring it back on for a little bit but it quickly goes back down.

We're not sure what's causing this.

There's a graph here showing a 30-day utilization spike.
blob.jpg720x252 25.3 KB

And 7-day CPU utilization graph showing the same spike:
blob.jpg720x237 23.7 KB

There wasn't a corresponding spike in traffic as far as we can tell. The only thing we noticed was that we saw ads injected on the site. Could that be the cause? Have no idea.

So we need to also get HTTPS from letsencrypt.

When do you need it done?

ASAP

What is your budget, in $ USD that you can offer for this task?

Flexible. Send a PM if you're interested.

Posts: 4

Participants: 3

Read full topic

↧

Docker manager reports upgrading even after rebuild

November 30, 2016, 8:16 am

≫ Next: Planned tag color issue when scrolled down

≪ Previous: Paid Gig: Backup & restore + HTTPS (letsencrypt) + diagnose crash

@pfaffman wrote:

A client whom I'd told reassuringly that it was safe to upgrade from the web interface sent an email that their site was down after the upgrade. No extensions (other than docker_manager) are installed. Let's Encrypt is included.

I did a ./launcher rebuild app and it's back up (Discourse 1.7.0.beta8), but docker manager reports that the site is currently upgrading.

I rebooted adn rebuilt again and it still says "currently upgrading."

Posts: 9

Participants: 4

Read full topic

↧

Planned tag color issue when scrolled down

November 30, 2016, 9:30 am

≫ Next: How do we demo the admin side?

≪ Previous: Docker manager reports upgrading even after rebuild

@jomaxro wrote:

Here on Meta the #planned tag is blue. It works properly when view a topic from /latest, as well as when scrolled to the top of the topic, but is currently not working when viewing the topic itself and the header has "collapsed". In this instance the color is black, and only turns blue on mouse hover.

Latest: (works)

Top of topic: (works)

Scrolled down: (broken)

Posts: 9

Participants: 4

Read full topic

↧

How do we demo the admin side?

November 30, 2016, 11:05 am

≫ Next: Cannot get a:visited on topic list for a short topic

≪ Previous: Planned tag color issue when scrolled down

@mydemo wrote:

How do we demo the admin side?

Posts: 2

Participants: 2

Read full topic

↧

Cannot get a:visited on topic list for a short topic

November 30, 2016, 11:45 am

≫ Next: 500 Error when editing an existing post

≪ Previous: How do we demo the admin side?

@ryantm wrote:

For a not-logged-in user, if a topic is so short and your browser window so tall that you cannot scroll, you cannot get a:visited set for a topic on the topic list. Even though you've visited, clicked around, and sat on the topic page for a while, it doesn't turn grey. If you resize the browser window so you can scroll, it gets marked as visited.

tested on: v1.7.0.beta8

Posts: 1

Participants: 1

Read full topic

↧

500 Error when editing an existing post

November 30, 2016, 11:52 am

≫ Next: Multiple-polls are not displaying correctly

≪ Previous: Cannot get a:visited on topic list for a short topic

@watchmanmonitor wrote:

I've had this twice now when editing an older topic in my discourse. The second was after a full docker update about 20 minutes ago.

Repro:

Find an old article
Edit it, in my case making a number of words into http links using command-k and pasting in the URL
Save the article

I get a 500 error shown on screen. I try to save again, and it works.

ActiveRecord::StatementInvalid (PG::InFailedSqlTransaction: ERROR:  current transaction is aborted, commands ignored until end of transaction block
: SELECT  "topics".* FROM "topics" WHERE ("topics"."deleted_at" IS NULL) AND "topics"."id" = 1072 LIMIT 1)
/var/www/discourse/vendor/bundle/ruby/2.3.0/gems/rack-mini-profiler-0.10.1/lib/patches/db/pg.rb:93:in `exec'

Stacktrace

gist.github.com

https://gist.github.com/YesThatAllen/ac922b2a6a33713cee67ab2585da424e

gistfile1.txt

/var/www/discourse/vendor/bundle/ruby/2.3.0/gems/rack-mini-profiler-0.10.1/lib/patches/db/pg.rb:93:in `exec'
/var/www/discourse/vendor/bundle/ruby/2.3.0/gems/rack-mini-profiler-0.10.1/lib/patches/db/pg.rb:93:in `async_exec'
/var/www/discourse/vendor/bundle/ruby/2.3.0/gems/activerecord-4.2.7.1/lib/active_record/connection_adapters/postgresql_adapter.rb:592:in `block in exec_no_cache'
/var/www/discourse/vendor/bundle/ruby/2.3.0/gems/activerecord-4.2.7.1/lib/active_record/connection_adapters/abstract_adapter.rb:484:in `block in log'
/var/www/discourse/vendor/bundle/ruby/2.3.0/gems/activesupport-4.2.7.1/lib/active_support/notifications/instrumenter.rb:20:in `instrument'
/var/www/discourse/vendor/bundle/ruby/2.3.0/gems/activerecord-4.2.7.1/lib/active_record/connection_adapters/abstract_adapter.rb:478:in `log'
/var/www/discourse/vendor/bundle/ruby/2.3.0/gems/activerecord-4.2.7.1/lib/active_record/connection_adapters/postgresql_adapter.rb:592:in `exec_no_cache'
/var/www/discourse/vendor/bundle/ruby/2.3.0/gems/activerecord-4.2.7.1/lib/active_record/connection_adapters/postgresql_adapter.rb:584:in `execute_and_clear'
/var/www/discourse/vendor/bundle/ruby/2.3.0/gems/activerecord-4.2.7.1/lib/active_record/connection_adapters/postgresql/database_statements.rb:160:in `exec_query'
/var/www/discourse/vendor/bundle/ruby/2.3.0/gems/activerecord-4.2.7.1/lib/active_record/connection_adapters/abstract/database_statements.rb:356:in `select'

This file has been truncated. show original

I'm using these plugins:

          - mkdir -p plugins
          - git clone https://github.com/discourse/docker_manager.git
          - git clone https://github.com/discourse/discourse-solved.git
          - git clone https://github.com/joebuhlig/discourse-feature-voting.git
          - git clone --branch watchman-community https://github.com/watchmanmonitoring/discourse-saml.git
          - git clone https://github.com/discourse/discourse-slack-official.git

What might be happening here?

Posts: 2

Participants: 2

Read full topic

↧

Multiple-polls are not displaying correctly

November 30, 2016, 1:12 pm

≫ Next: Feature to create quizzes?

≪ Previous: 500 Error when editing an existing post

@VNVJeep wrote:

It seems that if you create 2 or more polls within the same post, only the last poll shows up after posting it. While you're editing the poll, it does show up correctly in the preview window.

It's doing this on the current version running on the cloud-hosted version of Discourse, as well as here on meta, and on try.discourse.org.

Example...

Pick a number below:

1

2

3

0voters

Show results

Pick a letter below:

A

B

C

0voters

Show results