Mentioning @trust_level_0

October 12, 2017, 7:44 am

≪ Previous: Emoji's in title shown as code on initial load of a topic page

I just sent a message on my system mentioning a sub-group (@foo), as well as @trust_level_0. Another group (@bar) is set to “watch first post” on that category.

What I thought would happen: everyone in my system would get the message.

What actually happened: only the members of @foo, @bar and those who have enabled “mailing list mode” received the message.

Here are the settings of the trust_level_0 group:

Admin - AMICAL Connect 2017-10-12 17-45-57.png732x506 31.8 KB

Any ideas?

I’d like to get this message out ASAP to everyone, not sure how to approach this now

Posts: 2

Participants: 1

Read full topic

↧

Reply to user question

October 12, 2017, 9:20 am

≫ Next: WordPress / Discourse API Strategy: Get Reply Count via API Efficiently

≪ Previous: Mentioning @trust_level_0

@communitygal wrote:

Hi all, I’m not sure if there is a setting I need to enable or what, but I don’t think I have found it yet.

My colleagues would like their reply to be directly under the post they’re responding to. Is there a way to make that happen?

Thanks,
Emma

Posts: 2

Participants: 2

Read full topic

↧

WordPress / Discourse API Strategy: Get Reply Count via API Efficiently

October 12, 2017, 9:52 am

≫ Next: Discourse with Redis Cluster mode

≪ Previous: Reply to user question

@Berto wrote:

Hi all,

I’m going to use a hybrid of WP-Discourse + Embedded Comments via JS on our blog.

I’d like to show the number of replies / comments each post has, at least within the single post (single.php), but don’t want to slam the Discourse API 10,000+ times per day or slow the blog down while it retrieves that.

Does anyone have any good strategies for getting and saving the reply_count so that we don’t hit the server too often, or slow the blog from loading too often?

Are there good methods of “caching” the reply_count in post_meta / custom fields, and only updating it if it’s requested and the cache date is X hours old?

Or perhaps a cron job that just goes through all posts and updates regularly without slowing down the site ever?

Any other ideas? This is more of a WordPress strategy than anything.

Thanks!!

Posts: 3

Participants: 3

Read full topic

↧

Discourse with Redis Cluster mode

October 12, 2017, 9:54 am

≫ Next: Unable to launcher rebuild

≪ Previous: WordPress / Discourse API Strategy: Get Reply Count via API Efficiently

@p_shant_gohel wrote:

Hello,

I am trying to connect Discourse with Redis cache cluster. I have multiple nodes in my redis cluster. I get following error in log.

“CROSSSLOT Keys in request don’t hash to the same slot (Redis::CommandError)”

As per Redis guidelines:

When in cluster mode, Redis do not support multi-key operations where keys falls to the different key slots.
“Redis Cluster implements all the single key commands available in the non-distributed version of Redis. Commands performing complex multi-key operations like Set type unions or intersections are implemented as well as long as the keys all belong to the same node.”

I can see many of the redis operations in Discourse involves multi key operations. Find one such example as below. Does this mean that Discourse won’t be able to connect to redis in cluster mode? Are we limited to host Discourse with only one instance of redis in non cluster mode?
github.com
discourse/discourse/blob/master/lib/discourse_redis.rb#L193
 :sunion, :ttl, :type, :watch, :zadd, :zcard, :zcount, :zincrby, :zrange, :zrangebyscore, :zrank, :zrem, :zremrangebyrank,
 :zremrangebyscore, :zrevrange, :zrevrangebyscore, :zrevrank, :zrangebyscore ].each do |m|
  define_method m do |*args|
    args[0] = "#{namespace}:#{args[0]}" if @namespace
    DiscourseRedis.ignore_readonly { @redis.send(m, *args) }
  end
end


def mget(*args)
  args.map! { |a| "#{namespace}:#{a}" }  if @namespace
  DiscourseRedis.ignore_readonly { @redis.mget(*args) }
end


def del(k)
  DiscourseRedis.ignore_readonly do
    k = "#{namespace}:#{k}"  if @namespace
    @redis.del k
  end
end


def keys(pattern = nil)
Any help would be greatly appreciated.

Posts: 4

Participants: 3

Read full topic

↧

Unable to launcher rebuild

October 12, 2017, 10:01 am

≫ Next: Nightmode/day mode

≪ Previous: Discourse with Redis Cluster mode

@SMT wrote:

Getting the following error when ./launcher rebuild app.

Docker version 17.05.0-ce not supported, please upgrade to at least 17.06.2, or recommended 17.06.2

Posts: 2

Participants: 2

Read full topic

↧

Nightmode/day mode

October 12, 2017, 10:48 am

≫ Next: Anywhere to host free Discourse instance?

≪ Previous: Unable to launcher rebuild

@communitygal wrote:

Hi all,
I’m planning on making the header and footer optimized for day mode view. Is there way to display a different logo in the header if a user enables night mode?

Thanks,
Emma

Posts: 3

Participants: 2

Read full topic

↧

Anywhere to host free Discourse instance?

October 12, 2017, 11:09 am

≫ Next: Is it possible for a non admin/mod to delete a PM from an admin/mod?

≪ Previous: Nightmode/day mode

@BenM wrote:

Hello everyone and Discourse team,

I would like to ask whether there is a service or a place, where I can run a mini (100 users, 2 posts a day, 5 replies on each post) Discouse instance. Although, I do know “there ain’t such thing as a free lunch”

Regards, Ben

Posts: 4

Participants: 3

Read full topic

↧

Is it possible for a non admin/mod to delete a PM from an admin/mod?

October 12, 2017, 1:24 pm

≫ Next: Icon Type is Incorrectly Reported in manifest.json for Android

≪ Previous: Anywhere to host free Discourse instance?

@Jumanji wrote:

I’ve been able to archive the PM as a regular user, but I don’t see the option to delete it. I don’t think it exists.
I have a user claiming he deleted a PM sent by a admin/mod.

Thanks!

Posts: 2

Participants: 2

Read full topic

↧

Icon Type is Incorrectly Reported in manifest.json for Android

October 12, 2017, 1:59 pm

≫ Next: Big drop in Google traffic after migration

≪ Previous: Is it possible for a non admin/mod to delete a PM from an admin/mod?

@FelicianoTech wrote:

In every Discourse site’s manifest.json file, a list of icons are shown. For each icon, a “type” is provided which looks to be the icon’s mime type. Problem is, regardless of which format the icon actually is (ico, jpeg, svg), the provided type is image/png.

Examples of Discourse sites with this problem:

Chef - main site/manifest

Write the Docs - main site/manifest

Posts: 4

Participants: 3

Read full topic

↧

Big drop in Google traffic after migration

October 12, 2017, 2:16 pm

≫ Next: Getting a Stripe Checkout button (, tags) rendering in a post (via plugin).. help required

≪ Previous: Icon Type is Incorrectly Reported in manifest.json for Android

@Edan_Ben-Atar wrote:

In the past 90 days we’ve seen a steady decline in traffic Google is feeding us.

Before Discourse, our community lived in Vbulletin.
I’m afraid something is off with the transition.
A year ago, we saw an average of 200 clicks per day to the site, today that number officially reached zero.
I have a feeling the discourse slug c/c/279331 has a lot to do with it.
Of course, the huge amount of 301 errors that arouse from the transition didn’t help either.

While the community is big and thriving, this obviously has taken a toll on the community’s traction and presence.

our site is in Hebrew so it may not help too many to view it but for whatever it’s worth it’s sport enter .co.il - I prefer not to be crawled picked up by Google so just connect sport + enter + .co.il sorry to be annoying with that.

Any ideas ?! Help !

Posts: 8

Participants: 6

Read full topic

↧

Getting a Stripe Checkout button (, tags) rendering in a post (via plugin).. help required

October 12, 2017, 4:03 pm

≫ Next: SSL for hosted discourse

≪ Previous: Big drop in Google traffic after migration

@ChrisBeach wrote:

I’m currently working on the Discourse Stripe Donations plugin, forked from @rimian’s original work.

I’m close to getting a Stripe Checkout button displayed within a forum post, but something is preventing the Stripe HTML snippet (an inline script tag) from running.

Example here

Screen Shot 2017-10-13 at 00.03.41.jpg1346x1412 236 KB

As you can see, the button doesn’t render in the post. Yet the DOM contains HTML elements which should cause the button to be rendered :

Screen Shot 2017-10-13 at 00.05.28.png1274x446 50.4 KB

You may notice a button in the top left corner of the page – when I enabled a customised header with the same Stripe HTML, it worked perfectly. So, that rules out problems with the Stripe HTML or the interaction with Stripe’s server.

Below I’ve listed some things I have tried. Any more suggestions would be much appreciated

Enabling CORS in app.yml:
env:
       DISCOURSE_ENABLE_CORS: true
Liberal CORS origins:

Screen Shot 2017-10-12 at 23.57.21.png1264x208 20.7 KB

(I also tried a few different stripe https://… domains and sub domains in here without success)

Loads of different allowed iframes:

Screen Shot 2017-10-12 at 23.58.07.png1274x310 37.2 KB

HTTPS and Disabling Same Site Cookies:

Screen Shot 2017-10-12 at 23.58.43.png1282x406 50.8 KB

Posts: 1

Participants: 1

Read full topic

↧

SSL for hosted discourse

October 12, 2017, 4:23 pm

≫ Next: Let's Encrypt: Azure hostname issue

≪ Previous: Getting a Stripe Checkout button (, tags) rendering in a post (via plugin).. help required

@liron00 wrote:

I just signed up for hosted discourse at community.mysite.com using a CNAME redirect. What are the steps to make it https?

Posts: 2

Participants: 2

Read full topic

↧

Let's Encrypt: Azure hostname issue

October 12, 2017, 5:45 pm

≫ Next: Recommendations for Integrating Into Site Header/Footer

≪ Previous: SSL for hosted discourse

@CyberSathya wrote:

I’ve installed Discourse via Docker on a Ubuntu as mentioned in Set up Discourse in the cloud in under 30 minutes. The site works from localhost (ssh & port forward via putty). I’m trying to see if SSL is the reason I’m unable to access the site outside localhost via Virtual Machine’s Public IP Address or domain name (via ‘A’ records). So, here is what I’m trying to do to enable Let’s Encrypt.

cybersathya@Vaaithaaforum:/var/discourse$ sudo ./discourse-setup
Ports 80 and 443 are free for use
The configuration file containers/app.yml already exists!

. . . reconfiguring . . .

Saving old file as app.yml.2017-10-13-002911.bak

Found 3GB of memory and 1 physical CPU cores
setting db_shared_buffers = 768MB
setting UNICORN_WORKERS = 2

Hostname for your Discourse? [forum.vaaithaa.com]: forum.vaaithaa.com
Email address for admin account(s)? [sathya@vaaithaa.com]: sathya@vaaithaa.com
SMTP server address? [smtp.sendgrid.net]: smtp.sendgrid.net
SMTP port? [587]: 587
SMTP user name? [apikey]: apikey
SMTP password? [stmp password as given by sendgrid]
Let’s Encrypt account email? (ENTER to skip) [me@example.com]: sathya@vaaithaa.com

Checking your domain name . . .

WARNING:: forum.vaaithaa.com does not appear to resolve to 10.0.0.4.

LET’S ENCRYPT cannot work if their servers cannot access your host by name.
Unless you think you know why this naive check failed, DO NOT USE Let’s Encrypt.
(A typical reason for failure is an AWS server with an elastic IP.)

You should probably answer “n” at the next prompt and disable Let’s Encrypt.

Does this look right?

Hostname : forum.vaaithaa.com
Email : sathya@vaaithaa.com
SMTP address : smtp.sendgrid.net
SMTP port : 587
SMTP username : apikey
SMTP password : [stmp password as given by sendgrid]
Let’s Encrypt : sathya@vaaithaa.com

ENTER to continue, ‘n’ to try again, Ctrl+C to exit: n

IP Address (with context screenshot):

Screenshot (412).png1484x632 47.3 KB

Posts: 10

Participants: 3

Read full topic

↧

Recommendations for Integrating Into Site Header/Footer

October 12, 2017, 7:08 pm

≫ Next: Go to the quoted post button URL link is incorrect

≪ Previous: Let's Encrypt: Azure hostname issue

@jonobacon wrote:

Hi Everyone,

A common need my clients have is to integrate Discourse into an existing website so it shares the look and feel. This typically involves having the header/footer share the design and functionality of the site it fits into and then some CSS tweaks to ensure the same CSS rules apply to Discourse.

A limitation here is that (as far as I know), Discourse can only use static HTML in the header, so if the general site header has a logged in / logged out state, this is not reflected on the Discourse header.

How do you recommend this is solved? Is there a way of integrating Discourse into a site more elegantly than simply using an IFRAME here?

Thanks in advance.

Posts: 1

Participants: 1

Read full topic

↧

Go to the quoted post button URL link is incorrect

October 12, 2017, 8:17 pm

≫ Next: Selling discourse theme

≪ Previous: Recommendations for Integrating Into Site Header/Footer

@schungx wrote:

URL link for quoted posts [Go to the quoted post] button is incorrect.

It also contains undefined if the quoted post is a solved post.

Try it on Meta:

Let's Encrypt: Azure hostname issue installation

I’ve installed Discourse via Docker on a Ubuntu as mentioned in Set up Discourse in the cloud in under 30 minutes. The site works from localhost (ssh & port forward via putty). I’m trying to see if SSL is the reason I’m unable to access the site outside localhost via Virtual Machine’s Public IP Address or domain name (via ‘A’ records). So, here is what I’m trying to do to enable Let’s Encrypt. cybersathya@Vaaithaaforum:/var/discourse$ sudo ./discourse-setup Ports 80 and 443 are free for use …

The arrow URL is:

https://meta.discourse.org/t/go-to-the-quoted-post-button-url-link-is-incorrect/71978/1

Which is obviously not the quoted post, but the current post.

Now this:

image.png1533x282 30 KB

has the URL:

https://meta.discourse.org/t/lets-encrypt-azure-hostname-issue/undefined/3

which is obviously incorrect.

Posts: 2

Participants: 2

Read full topic

↧

Selling discourse theme

October 13, 2017, 12:13 am

≫ Next: Hyphen-minus isn't listed in the username valid character hint but is allowed

≪ Previous: Go to the quoted post button URL link is incorrect

@WallBB wrote:

Hi all,
I had a quick question regarding discourse themes, is it allowed to sell theme created on discourse on 3rd party sites such themeforest etc?
I am unable to find such information and that is why I wanted to know this.

Posts: 1

Participants: 1

Read full topic

↧

Hyphen-minus isn't listed in the username valid character hint but is allowed

October 13, 2017, 1:53 am

≫ Next: Approving an already-existing user through API?

≪ Previous: Selling discourse theme

@Lin-Buo-Ren wrote:

As the following screenshots(second one in reply)

擷取選取區域_308.png711x534 29.3 KB

Posts: 4

Participants: 2

Read full topic

↧

Approving an already-existing user through API?

October 13, 2017, 2:18 am

≫ Next: Dismiss-button in Unread

≪ Previous: Hyphen-minus isn't listed in the username valid character hint but is allowed

@Frank_Bailey wrote:

I have created 17500 users via the Discourse API and uploaded all user avatars with the help of some very nice people here on Meta Discourse. All these users are in a “pending” state, and I would like to approve these users in bulk via the API. However, I only see an API endpoint to “activate” a user. As all my users are already active (but not approved) my question is, can I approve the users via the API, or must approval be done manually by the screenfull in the admin backend of Discourse? 17500 users will be a lot to have to approve manually.

Thanks in advance!

Posts: 4

Participants: 2

Read full topic

↧

Dismiss-button in Unread

October 13, 2017, 2:47 am

≫ Next: Canned reply with " Notification "

≪ Previous: Approving an already-existing user through API?

@Lykke wrote:

I just read about the function of the dismiss-button in "Mark all read" button on all New and Unread topics:

We just moved forum platform from vBulletin to Discourse, and we moved all topics to the new platform. That means that I (and all other users) have a lovely number of unread topics. For me it’s 2674!

There’s two issues for me/us with the Dismiss-button:

I’ll never get to the bottom of that list and find the button.

I actually still want to track all of the posts in case someone write something new in them. I would just love a clean slate instead of a couple of thousand of unread posts.

Is there really no way around this other than me going through every single topic?

Posts: 6

Participants: 3

Read full topic

↧

Canned reply with " Notification "

October 13, 2017, 3:58 am

≫ Next: Trying to disable Discobot

≪ Previous: Dismiss-button in Unread

@dimu001 wrote:

Hi,

since I want to use PM with individual users in topic, But I can not track Which person I have PM last,
If I have to run and give private PM’s for user I would like to have and notification like this " in the Flag option "

Untitled.png856x109 3.15 KB

but this notification only appear through FLAG Option .

So can this notification also implement in " how we normally PM users like below.

Posts: 1

Participants: 1

Read full topic

↧

Enabling CORS in app.yml:

Liberal CORS origins:

Loads of different allowed iframes:

HTTPS and Disabling Same Site Cookies:

Latest Images