@wolftune wrote:

There seem to be some ways where even an admin cannot undo a (potentially mistaken) moderator action.

For example, a mod can disagree with their own flagging of a post. In that case, the same mod cannot flag the post again. That process seems to permanently block the mod from flagging the post, no way to undo.

There’s Undo official warning too

Finally, it seems from my testing that if a mod chooses “agree” and “hide post” after flagging notification, the mod (even as admin) cannot change their mind and show the post again. There appears to be no function to unhide the post other than the original poster editing it.

Am I missing something?

mod-mode could help avoid

If it were possible for mods to log out of mod mode or similar have an extra step to take for a “sudo mode” type of thing, that could at least be an appropriate way to be extra careful around non-undoable actions. But, as a UX generality, extra blocks and warnings before taking permanent actions are still not as optimal as having working undo.

Posts: 2

Participants: 2

Read full topic

@supermathie wrote:

Continuing the discussion from Support for contacting users whose emails are bouncing:

It would be SUPER handy to have the Queue ID of the mail server for the sent message available here to track down wayward messages which the end user has not received but which have also not bounced.

Posts: 1

Participants: 1

Read full topic

@nothing wrote:

I already saw the problem with the backup installation, I did not upload the old backup.

I created a site again, bought a backup that was not included, but did not upload it while trying to reinstall.

I am doing a backup restore on a new site, but I get an error.

ERROR LOG:

[2018-03-15 22:30:32] [STARTED]
[2018-03-15 22:30:32] 'sword' has started the restore!
[2018-03-15 22:30:32] Marking restore as running...
[2018-03-15 22:30:32] Making sure /var/www/discourse/tmp/restores/default/2018-03-15-223032 exists...
[2018-03-15 22:30:32] Copying archive to tmp directory...
[2018-03-15 22:30:32] Unzipping archive, this may take a while...
[2018-03-15 22:30:33] No metadata file to extract.
[2018-03-15 22:30:33] Validating metadata...
[2018-03-15 22:30:33]   Current version: 20180309014014
[2018-03-15 22:30:33]   Restored version: 20180309014014
[2018-03-15 22:30:33] Extracting dump file...
[2018-03-15 22:30:33] Restoring into 'backup' schema
[2018-03-15 22:30:33] Restoring dump file... (can be quite long)
[2018-03-15 22:30:33] SET
[2018-03-15 22:30:33] SET
[2018-03-15 22:30:33] SET
[2018-03-15 22:30:33] SET
[2018-03-15 22:30:33] set_config
[2018-03-15 22:30:33] ------------
[2018-03-15 22:30:33] (1 row)
[2018-03-15 22:30:33] SET
[2018-03-15 22:30:33] SET
[2018-03-15 22:30:33] SET
[2018-03-15 22:30:33] SET
[2018-03-15 22:30:33] SET
[2018-03-15 22:30:33] ERROR:  relation "api_keys" already exists
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, commands ignored until end of transaction block
[2018-03-15 22:30:33] ERROR:  current transaction is aborted, com…

Posts: 5

Participants: 3

Read full topic

@ninermac wrote:

I’ve noticed that my site when clicking on a topic link takes you to the wrong post. When scrolled down to where the last post is the only one visible, the post slider bar will say there are 2 more posts left to see. Any idea what might be causing it? Pic below.

ink (2).jpg2048x970 453 KB

Posts: 2

Participants: 2

Read full topic

@8BIT wrote:

on mobile. iphone X. default theme. uploading image. just need a space between the word uploading and the percent. that’s all.

IMG_2620.jpg1125x1400 216 KB

Posts: 2

Participants: 2

Read full topic

@1101010 wrote:

We’ve got a troll who keeps coming back and it’s true that he has a new IP each time but it’s relatively easy for me to spot him and stop him based on his location coming up and his style. Mostly he has IPv6 IPs

What I noticed was that Screened IPs shows a couple of his:

image.png833x421 25.5 KB

But they’re not the full IP. When I put 2001 into the Search box on the top right it brings up nothing, whereas if I do, say, ‘81’, I get a couple of IPv4s come up.

Anyway, all of his IPv6 addresses begin
2001:2012:208:2a00
so I’d like to do a block mask on that basis but I’m not sure if masks are possible but I assume they are. However, since the full IP isn’t showing on this screen I wasn’t sure what that meant in terms of doing such a block?

Thanks

Posts: 4

Participants: 3

Read full topic

@huynhthai824 wrote:

I wanna move post and comment to other website Discourse. And select option user to post. List user of other Discourse. Can we build or ready to do it?
My available budget: 100$
Many thank!

image.jpg2509x1075 507 KB

Posts: 4

Participants: 2

Read full topic

@Flower_Child wrote:

I’ve been looking for a way to customize which groups that appear on the /about page. My community has not only admins and moderators, but also other custom “staff” groups (such as a social media team) that I’d like to be able to include there as well. Ideally it would be nice to have a boolean field that can be set per group determining whether it should appear on that page, which is what I’ve been looking into with no success.

Does no such feature exist? And if it would have to be done via a plugin, what would be the best way to do that? I know how to create plugins and have already made some simple changes using them, I’m just not sure how to approach this in particular.

Posts: 2

Participants: 2

Read full topic

@erlend_sh wrote:

We recently started hiding descriptions in the category drop-down for TL1 users and above. I wonder if we could apply this to some other visuals in Discourse. The first that came to mind is the NEW indicator, which is pretty strong:

Screen Shot 2018-03-16 at 13.47.16.png1048x798 60.4 KB

What if we toned it down for TL1?

discourse-new-tl1.jpg1048x798 111 KB

We got close to changing this once, but opted not to. @sam objected to scaling it to TLs for some reason; I’m curious if that thinking has changed.

Personally I think we have a really good opportunity with TLs to do progressive reduction to an extent that few other applications can do with such ease.

Posts: 11

Participants: 7

Read full topic

@trangchongcheng wrote:

I using OS Ubuntu 1 GB RAM, I want to ask can predictable how many people are online at one time with 1G RAM.
Thank support!

Posts: 1

Participants: 1

Read full topic

@huynhthai824 wrote:

My site have 10 user, i wanna Allow 5 user only view topic that topic time from 2016 to 2018. And about 5 user remaining, i deny view topic post before 2016.
How can i setup it?
Thank you!

Posts: 6

Participants: 3

Read full topic

@Jeroen_Van_Der_Mark wrote:

Im trying to figure out if it’s possible to hide a optin bar (subscribe bar/Optinmonster) for users that are logged in.

So if users are logged in they shouldn’t see the bar. I can set these values in Optinmonster (cookie name +/or cookie value)? Does any of you know the solution?

Here is a screenshot:

Schermafbeelding 2018-03-16 om 14.11.03.png1094x411 22.6 KB

Thanks in advance!!!

Posts: 3

Participants: 2

Read full topic

@twyK wrote:

Hello, I’ve set up a Discourse forum some days ago, today I was going to login but when I press the button, the form doesn’t appear…

Posts: 2

Participants: 2

Read full topic

@McBlu wrote:

Morning guys,

I see discussion about a font size theme. Is there one? I can’t find it if there is. My selection of the correct keywords in searches stinks lately.

Absent that, what are the best up to date topics for adding code to change the font size?

Am I understand this right? You can change the base code and all fonts get changed in proportion to the base font size or . . . if you want to change font size for a particular area, you would add code specific for that area?

Posts: 6

Participants: 3

Read full topic

@shahidmir wrote:

Hi

I am trying to achieve SSO for the following scenario.

My application authenticates users agains auth0. Once authenticated, whenever the user visits the discourse page, I expect the user to be logged in silently without having to re-enter credentials (using the credentials from the initial login to my application).

Has anyone tackled this scenario?

Currently i have an Auth0 rule that upon authentication re-directs to discourse via the /sso/ path, passing the sso credentials from Auth0. This logs the user in, or creates the discourse account and then logs user in for a new discourse user.
But I want to achieve this without the Auth0 redirect so the experience to the user is seamless and he/she is already logged in when deciding to visit the discourse page.

Any assistance would be appreciated.
The same issue has been raised here, but there was no solutions proposed:

Regards

Posts: 2

Participants: 2

Read full topic

@Campo_Popo wrote:

Hi There,

I just imported from MyBB to discourse. Old forum had many BBcode into it. During import I set the environment value INPUT=1. Even after this the BBcode is not converted into Markdown. Please tell me how do I convert it into markdown.

Selection_027.png1287x597 61.1 KB

My plan is to import into development install and than move to the production.

Posts: 4

Participants: 2

Read full topic

@communitygal wrote:

Can I use an iframe in a post? Are they supported?

Posts: 2

Participants: 2

Read full topic

@BlackKnob wrote:

1. do we really need to see the column with numbers?
   this feels like an under-the-hood info, that should be hidden

2. the [Fix Positions] button is redundant.
   pressing [Save Order] should fix position before saving.

3. drag-&-drop for reordering would probably be more intuitive than arrows

Screen Shot 2018-03-16 at 1.09.21 PM.png383x648 35.9 KB

Posts: 4

Participants: 3

Read full topic

@Premdeep_Singh1 wrote:

I 'm trying to configure Facebook SIGNUP & LOGIN but it is showing errors. I added with one fb id, it was showing error first since I registered for this forum. Then suddenly started working. Now again started showing same errors. Then I configured with another fb id but still same error is coming. I do not know what is issue. it should be working once configured. I have screen shot of the error. I have added full information in the FB FORM.

screenshot.png1280x738 135 KB

Posts: 2

Participants: 2

Read full topic

@nixie wrote:

Does this come out of the box with latest Discourse?

Posts: 2

Participants: 2

Read full topic